3456
WS-X4724-SFP-E Overview Cisco Catalyst WS-X4724-SFP-E line-card is designed for requiring line-rate capability for enterprise, mid-market and commercial core and distribution deployments. Integrated 24 SFP nonblocking ports with IEEE802.1AE Fiber Encryption and Cisco TrustSec capability in hardware, WS-X4724-SFP-E line-card delivers high-performance and secures user experience. This WS-X4724-SFP-E is similar with the WS-X4724-SFP-E=. The WS-X4724-SFP-E= is a spare one. Quick Specs Figure 1 shows the appearance of WS-X4724-SFP-E. Table 1 shows the Quick Specs. Product Code WS-X4724-SFP-E Line-Card Type Cisco Catalyst 4500 47xx E-Series Line Cards Chassis Support Supported on all 3, 6, 7 (R-E & R+E) and 10 (R-E & R+E)
Call
Cisco Catalyst WS-X4724-SFP-E line-card is designed for requiring line-rate capability for enterprise, mid-market and commercial core and distribution deployments. Integrated 24 SFP nonblocking ports with IEEE802.1AE Fiber Encryption and Cisco TrustSec capability in hardware, WS-X4724-SFP-E line-card delivers high-performance and secures user experience. This WS-X4724-SFP-E is similar with the WS-X4724-SFP-E=. The WS-X4724-SFP-E= is a spare one.
Figure 1 shows the appearance of WS-X4724-SFP-E.
Table 1 shows the Quick Specs.
Product Code |
WS-X4724-SFP-E |
Line-Card Type |
Cisco Catalyst 4500 47xx E-Series Line Cards |
Chassis Support |
Supported on all 3, 6, 7 (R-E & R+E) and 10 (R-E & R+E) slot chassis |
Supervisor Support |
Supervisor Engine 8-E, Supervisor Engine 7-E, Supervisor Engine 7L-E |
per-slot capacity |
24 gigabits |
Max Rated Power (W) |
40 |
Rated MTBF (Hours) |
1,139,510 |
Modules |
·24 * SFP nonblocking ports ·Support 1G/100FX SFP (mix and match as well) at line rate |
Cisco IOS Software |
Cisco IOS Software Release IOS-XE3.5.0E/15.2(1)E or later |
hardware |
IEEE 802.1AE Fiber Encryption and Cisco TrustSec capability in hardware |
Service provider |
GE aggregation for DSLAM/PON/mobile data backhaul |
L2-4 Jumbo Frame support |
up to 9216 bytes |
·All power numbers shown in Table 1 are maximum values recommended for facility power and cooling capacity planning. These figures are not indicative of the actual power draw during operation. Typical power draw is about 20 percent lower than the maximum value shown.
WS-X4724-SFP-E Specifications |
|
Port Information |
|
Type |
E-Series Gigabit Ethernet SFP Line Cards |
Number of Ports |
24 |
Port Speed |
1GbE/100Mbps |
Port Type |
Pluggables |
Wire Rate |
1:1 |
Feature |
|
Standards |
● Gigabit Ethernet: IEEE 802.3z, IEEE 802.3x, IEEE 802.3ab, IEEE 803.3at, IEEE 802.3af, IEEE 802.3az ● 1000BASE-X (GBIC), 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, CWDM |
EtherChannel Technology |
● Gigabit EtherChannel: All 1000 Mbps ports ● 10 Gigabit EtherChannel: All 10Gbps ports ● IEEE 802.3ad (Link Aggregation Control Protocol): All 1000 Mbps ports ● Port Aggregation Protocol (PagP): Yes ● Number of ports per tuple: 8 ● EtherChannel and IEEE 802.3ad technology across line cards: Yes |
Physical Dimensions |
● Occupies one slot in the Cisco Catalyst 4500 Series platform ● Dimensions (H x W x D): 1.2 x 14.25 x 10.75 in. (3.0 x 36.2 x 27.3 cm) |
Environmental Conditions |
● Operating temperature: 32° to 104°F (0° to 40°C) ● Storage temperature: -40° to 167°F (-40° to 75°C) ● Relative humidity: 10 to 90%, noncondensing ● Operating altitude: -60 to 3000m |
Safety Conditions |
Fiber optic lasers: Class 1 laser products |
Safety Certifications |
● UL 1950 ● EN 60950 ● CSA-C22.2 no 950 ● IEC 950 ● IEC 60950-1, 2nd Ed. EN 60950-1, 2nd Ed. UL 60950-1, 2nd Ed. CAN/CSA-C22.2 No. 60950-1 2nd Ed.11 |
Electromagnetic Emissions Certifications |
● FCC 15J Class A ● VCCI Class A ● CE Marking ● EN 55022 Class A ● EN 55024 Class A ● CISPR 22 Class A ● AS/NZ 3548 ● NEBS Level 3 (GR-1089-CORE, GR-63-CORE) ● ETSI ETS-300386-2 ● EN 50121-4 |
ROHS Compliance |
ROHS5 |
Power and MTBF Information |
|
Max Rated Power (W) |
40 |
Rated MTBF (Hours) |
1,139,510 |