3425
WS-X4712-SFP+E Overview Cisco Catalyst WS-X4712-SFP+E line-card is designed for high-speed backbone and switch-to-switch applications. Integrated 12 SFP+ 10 GE ports or 12 SFP 1 GE ports with IEEE802.1AE Fiber Encryption and Cisco TrustSec capability in hardware, WS-X4712-SFP+E line-card delivers high-performance and secures user experience. This WS-X4712-SFP+E is similar with the WS-X4712-SFP+E=. The WS-X4712-SFP+E= is a spare one. Quick Specs Figure 1 shows the appearance of WS-X4712-SFP+E. Table 1 shows the Quick Specs. Product Code WS-X4712-SFP+E Line-Card Type Cisco Catalyst 4500 47xx E‑Series Line Cards Per-Slot Bandwidth 48 Gbps Chassis Support Cisco Catalyst 4507R-E and 4510R-E Supervisor Support ·Supervisor Engine 8-E,·Supervisor
Call
Cisco Catalyst WS-X4712-SFP+E line-card is designed for high-speed backbone and switch-to-switch applications. Integrated 12 SFP+ 10 GE ports or 12 SFP 1 GE ports with IEEE802.1AE Fiber Encryption and Cisco TrustSec capability in hardware, WS-X4712-SFP+E line-card delivers high-performance and secures user experience. This WS-X4712-SFP+E is similar with the WS-X4712-SFP+E=. The WS-X4712-SFP+E= is a spare one.
Figure 1 shows the appearance of WS-X4712-SFP+E.
Table 1 shows the Quick Specs.
Product Code |
WS-X4712-SFP+E |
Line-Card Type |
Cisco Catalyst 4500 47xx E‑Series Line Cards |
Per-Slot Bandwidth |
48 Gbps |
Chassis Support |
Cisco Catalyst 4507R-E and 4510R-E |
Supervisor Support |
·Supervisor Engine 8-E, ·Supervisor Engine 7-E, ·Supervisor Engine 7L-E |
per-slot capacity |
48 gigabits |
Max Rated Power (W) |
90 |
Rated MTBF (Hours) |
387,172 |
Modules |
·Up to 12 ports 10GE SFP+ (10GBASE-R) or 12 ports GE SFP (1GBASE-X) ·SFP+ and SFP can be used simultaneously on the same line card without any restrictions |
Cisco IOS Software |
Cisco IOS® XE Release 3.1.0SG or later |
hardware |
IEEE 802.1AE and Cisco TrustSec capability in hardware |
Service provider |
10GE/GE mix aggregation for DSLAM/PON/mobile data backhaul |
L2-4 Jumbo Frame support |
up to 9216 bytes |
·All power numbers shown in Table 1 are maximum values recommended for facility power and cooling capacity planning. These figures are not indicative of the actual power draw during operation. Typical power draw is about 20 percent lower than the maximum value shown.
WS-X4712-SFP+E Specifications |
|
Port Information |
|
Type |
E-Series 10 Gigabit Ethernet Line Cards |
Number of Ports |
12 |
Port Speed |
10GBASE-R |
Port Type |
SFP+ or SFP |
Wire Rate |
2.5-to-1 with SFP+ 1:1 with SFP |
Feature |
|
Standards |
● Gigabit Ethernet: IEEE 802.3z, IEEE 802.3x, IEEE 802.3ab, IEEE 803.3at, IEEE 802.3af, IEEE 802.3az ● 1000BASE-X (GBIC), 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, CWDM |
EtherChannel Technology |
● Gigabit EtherChannel: All 1000 Mbps ports ● 10 Gigabit EtherChannel: All 10Gbps ports ● IEEE 802.3ad (Link Aggregation Control Protocol): All 1000 Mbps ports ● Port Aggregation Protocol (PagP): Yes ● Number of ports per tuple: 8 ● EtherChannel and IEEE 802.3ad technology across line cards: Yes |
Physical Dimensions |
● Occupies one slot in the Cisco Catalyst 4500 Series platform ● Dimensions (H x W x D): 1.2 x 14.25 x 10.75 in. (3.0 x 36.2 x 27.3 cm) |
Environmental Conditions |
● Operating temperature: 32° to 104°F (0° to 40°C) ● Storage temperature: -40° to 167°F (-40° to 75°C) ● Relative humidity: 10 to 90%, noncondensing ● Operating altitude: -60 to 3000m |
Safety Conditions |
Fiber optic lasers: Class 1 laser products |
Safety Certifications |
● UL 1950 ● EN 60950 ● CSA-C22.2 no 950 ● IEC 950 ● IEC 60950-1, 2nd Ed. EN 60950-1, 2nd Ed. UL 60950-1, 2nd Ed. CAN/CSA-C22.2 No. 60950-1 2nd Ed.11 |
Electromagnetic Emissions Certifications |
● FCC 15J Class A ● VCCI Class A ● CE Marking ● EN 55022 Class A ● EN 55024 Class A ● CISPR 22 Class A ● AS/NZ 3548 ● NEBS Level 3 (GR-1089-CORE, GR-63-CORE) ● ETSI ETS-300386-2 ● EN 50121-4 |
ROHS Compliance |
ROHS5 |
Power and MTBF Information |
|
Max Rated Power (W) |
90 |
Rated MTBF (Hours) |
387,172 |