Xem ảnh lớn

CISCO3925/K9

3900 Series

9693

Overview (CISCO3925/K9) The Cisco 3925 router, modular Services Performance Engine (SPE) 100, which can be upgraded for even higher performance as next-generation WAN environments evolve. Quick Specs Figure 1 shows the appearance of the CISCO3925/K9. Table 1 shows the Quick Specs of the CISCO3925/K9. Product Code CISCO3925/K9 Services Performance Engine module w/SPE 100 Rack Units 3U Interfaces 3 integrated 10/100/1000 Ethernet ports with 2 ports capable of RJ-45 or SFP connectivity Expansion Slot(s) 2 service module slots 1 Internal Services Module slot 4 onboard digital signal processor (DSP) slots 4 Enhanced High-Speed WAN Interface Card (EHWIC) slots RAM 1 GB

Overview (CISCO3925/K9)

The Cisco 3925 router, modular Services Performance Engine (SPE) 100, which can be upgraded for even higher performance as next-generation WAN environments evolve.

Quick Specs

Figure 1 shows the appearance of the CISCO3925/K9.

CISCO3925/K9

Table 1 shows the Quick Specs of the CISCO3925/K9.

Product Code

CISCO3925/K9

Services Performance Engine module

w/SPE 100

Rack Units

3U

Interfaces

3 integrated 10/100/1000 Ethernet ports with 2 ports capable of RJ-45 or SFP connectivity

Expansion Slot(s)

2 service module slots

1 Internal Services Module slot

4 onboard digital signal processor (DSP) slots

4 Enhanced High-Speed WAN Interface Card (EHWIC) slots

RAM

1 GB (installed) / 2 GB (max)

Flash Memory

256 MB (installed) / 8 GB (max)

Dimensions

47.6 cm x 43.8 cm x 13.3 cm

Package Weight

27.78 Kg

Product Details

Figure 2 shows the front panel of the Cisco 3925 router.

CISCO3925/K9 Front panel

Note:

① On/Off switch ② Power connector ③ LEDs area

Table 2 shows the LEDs area description.

LED

Description

SYS status LED

Solid green

Solid green indicates normal operation.

Blinking green

System is booting or is in ROM monitor mode.

Amber

System error.

Off

Power is off or system board is faulty.

ACT status LED

Solid or blinking green

Solid or blinking indicates packet activity between the forwarding and routing engine and any I/O port.

Off

No packet transfers are occurring.

POE

Green

IP phone power is on.

Amber

IP phone power is not on.

PS1 / PS2

Green

System is running.

Amber

System is not running.

Figure 3 shows the back panel of the Cisco router 3925/K9 with LEDs.

CISCO3925/K9 Back LED

Note:

① Compact flash 0 and 1 (0, right) ② ISM ③ PVDM3 0,1,2 and 3 (0, far right) ④ EN (Enable USB console) ⑤ EN (Enable RJ-45 console) ⑥ SFP S ⑦ SFP EN ⑧ S (Speed) ⑨ L (Link)

Table 3 shows the description of these LEDs on the back panel.

LED

Color

Description

Location

CompactFlash 1

Green

Flash memory is busy.

Back Panel

Amber

Initialized with error.

Blinking Green then turns off

CompactFlash is ready for removal.

CompactFlash 0

Green

Flash memory is busy.

Back Panel

Amber

Initialized with error.

Blinking Green then turns off

CompactFlash is ready for removal.

S (Speed)

1 blink + pause

GE port operating at 10 Mb/s.

Back Panel

2 blink + pause

GE port operating at 100 Mb/s.

3 blink + pause

GE port operating at 1000 Mb/s.

L (Link)

Green

GE link is established.

Back Panel

Off

No GE link is established.

EN (RJ-45 console port)

Green

The RJ-45 console port is active.

Back Panel

EN (USB serial console port)

Green

The USB console port is active.

Back Panel

ISM

Green

Initialized.

Back Panel

Amber

Initialized with error.

Off

Not installed.

PVDM3 0,1,2 and 3

Green

PVDM is initialized.

Back Panel

Amber

PVDM is detected but not initialized.

Off

No PVDM installed.

SFP S

Blinking green

Blinking frequency indicates port speed.

Back Panel

SFP EN

Off

Not present.

Back Panel

Green

Present and enabled.

Amber

Present with failure.

Figure 4 shows the back panel of the Cisco 3925 router with slots and ports.

CISCO3925/K9 Back Slot

Note:

① Compact flash 0 and 1 (0, right) ② EHWIC 0,1,2 and 3 (0, far right) ③ USB serial port ④ RJ-45 serial console port ⑤ AUX port ⑥ SFP 1 and SFP 2 (2, top) 

⑦ 10/100/1000 Ethernet port GE 0/1 and GE 0/2 (GE 0/1, down) ⑧ 10/100/1000 Ethernet port GE 0/0 ⑨ USB 0 and USB 1 (1,top) ⑩ Ground ⑪ Service module slots

Figure 5 shows the SPE area and you can upgrade these slots and ports directly by one SPE module.

The Cisco 3900 Series offers field-replaceable SPEs which allow you to protect your initial investment in the Cisco 3900 platform for a longer time period and scale router performance as your network and branch-office needs grow.

CISCO3925E/K9 SPE

Specification (CISCO3925/K9)

CISCO3925/K9 Specification

General

Manufacturer

Cisco Systems, Inc

Manufacturer Part Number

CISCO3925/K9

Product Type

Router

Form Factor

Desktop - modular - 3U

Connectivity Technology

Wired

Data Link Protocol

Ethernet, Fast Ethernet, Gigabit Ethernet

Capacity

Cisco Unified Communications Manager Express sessions : 250 Cisco Unified SRST sessions : 730

Network / Transport Protocol

IPSec, PPPoE, L2TPv3

Routing Protocol

OSPF, IS-IS, BGP, EIGRP, DVMRP, PIM-SM, IGMPv3, GRE, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based

routing (PBR)

Remote Management Protocol

SNMP, RMON

Encryption Algorithm

SSL

Features

Firewall protection, VPN support, MPLS support, Syslog support, content filtering, IPv6 support, Class-Based Weighted Fair Queuing

(CBWFQ), Weighted Random Early Detection (WRED), Quality of Service (QoS), Dynamic Multipoint VPN (DMVPN)

Compliant Standards

IEEE 802.3, IEEE 802.1Q, IEEE 802.1ah, IEEE 802.1ag

DRAM Memory

1 GB (installed) / 2 GB (max)

Flash Memory

256 MB (installed) / 8 GB (max)

LED Status Lights Indicators

Link activity, power

Connectivity Slots

Router Interfaces

3 x 10Base-T/100Base-TX/1000Base-T - RJ-45
Management : 1 x console - RJ-45
Management : 1 x console - mini-USB Type B
Serial : 1 x auxiliary - RJ-45
Hi-Speed USB : 2 x 4 PIN USB Type A
2 x SFP (mini-GBIC)

Expansion Slots Total (Free)

4 ( 4 ) x EHWIC
4 ( 4 ) x PVDM
2 ( 1 ) x CompactFlash Card
1 ( 1 ) x Expansion Slot
2 ( 2 ) x service module (SM)

Power Supply

Power Device

Power supply - internal

Voltage Required

AC 120/230 V ( 47/63 Hz )

Dimensions / Weight / Miscellaneous

Dimensions (W × D × H)

18.74 × 17.24 × 5.24 in (47.6 × 43.8 × 13.3 cm)

Package Wight

61.3 lbs (27.78 Kg)

Weight

39 lbs (17.7 kg)

Compliant Standards

CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, EN50082-1, AS/NZS 60950-1, AS/NZ 3548 Class A,

CAN/CSA-E60065-00, ICES- 003 Class A, CS-03, FCC CFR47 Part 15, EN300-386, UL 60950-1, IEC 60950-1,

EN 60950-1, CSA C22.2 No. 60065, BSMI CNS 13438

System Software

IOS Software Included

Cisco IOS IP Base

Sản phẩm liên quan


HỖ TRỢ KỸ THUẬT