9978
verview (AIR-AP2802E-S-K9) AIR-AP2802E-S-K9 is one of the Cisco Aironet 2800 Series Access Points. This 2800 series, delivering new 802.11ac Wave 2 standard, is ideal for large enterprise organizations that rely on Wi-Fi to engage with customers. The Series is a hands-off product that’s intelligent enough to make decisions based on end-device activities and usage. AIR-AP2802E-S-K9 provides external antenna and S regulatory domain. It also supports Dual-band controller-based 802.11a/g/n/ac. Quick Specs Table 1 Product Code AIR-AP2802E-S-K9 Feature Dual-band controller-based 802.11a/g/n/ac Frequency band and 20-MHz operating channels S (S regulatory domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320
Call
AIR-AP2802E-S-K9 is one of the Cisco Aironet 2800 Series Access Points. This 2800 series, delivering new 802.11ac Wave 2 standard, is ideal for large enterprise organizations that rely on Wi-Fi to engage with customers. The Series is a hands-off product that’s intelligent enough to make decisions based on end-device activities and usage. AIR-AP2802E-S-K9 provides external antenna and S regulatory domain. It also supports Dual-band controller-based 802.11a/g/n/ac.
Table 1
Product Code |
AIR-AP2802E-S-K9 |
Feature |
Dual-band controller-based 802.11a/g/n/ac |
Frequency band and 20-MHz operating channels |
S (S regulatory domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320 GHz; 8 channels - 5.500 to 5.700 GHz;, 11 channels - 5.745 to 5.825 GHz; 5 channels |
Antenna |
External Antenna |
Features |
- 4x4 MU-MIMO with three spatial streams - MRC - 802.11ac Beamforming - 20-, 40-, 80, 160-MHz channels - PHY data rates up to 5.2 Gbps - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
Interfaces |
- 2 x 100/1000BASE-T autosensing (RJ-45) - Management console port (RJ-45) - USB 2.0 (enabled via future software) |
System memory |
- 1024 MB DRAM - 256 MB flash |
Dimensions (W x L x H) |
8.66 x 8.77 x 2.50 in. |
Net Weight |
4.6 lb (2.09 kg) |
Figure 1 shows the face of AIR-AP2802E Model.
Notes:
① |
Dual-band antenna connector A with antenna |
④ |
Dual-band antenna connector C with antenna |
② |
Location of the Smart antenna connector port on the right side of the AP |
⑤ |
Status LED |
③ |
Dual-band antenna connector D with antenna |
⑥ |
Dual-band antenna connector B with antenna |
Figure 2 shows the Smart Antenna Connector and DART cable on the AIR-AP2802E model.
The 2802E model has a Smart antenna connector, which is connected directly to the flexible radio. Without a supported external antenna connected to the Smart Antenna connector, the flexible radio can stay only in 2.4 GHz mode. If an external antenna is connected, the flexible radio can be used in the full Flexible Radio Assignment mode, allowing dual 5 GHz and Wireless Security Monitoring modes.
To connect to any supported RP-TNC connector-type external antenna to the Smart antenna connector, use the DART cable connector AIR-CAB002-DART-R=, which is to be ordered separately.
AIR-AP2802E-S-K9 Specification |
|
Software |
|
Supported wireless LAN controllers |
|
802.11n version 2.0 (and related) capabilities |
|
802.11ac Wave 1 capabilities |
|
802.11ac Wave 2 capabilities |
|
Integrated antenna |
Flexible radio (either 2.4 GHz or 5 GHz)
Dedicated 5-GHz radio
|
External antenna (sold separately) |
|
Smart antenna connector |
|
Interfaces |
◦ 2x100/1000BASE-T autosensing (RJ-45)
|
Indicators |
|
Dimensions (W x L x H) |
|
Weight |
Cisco Aironet 2802i
Cisco Aironet 2802e
|
Input power requirements |
|
Power draw |
|
Environmental |
Cisco Aironet 2802i
Cisco Aironet 2802e
|
System memory |
|